Deciding Where to Locate Tunnels and Tunnel Depths

In most cases, the tunnels noted above are below public rights-of-way. In some cases, it is necessary to locate tunnels under private property for a variety of reasons, including:

• Need to connect to stations located at major centers and destinations.
• Large radius turns required for train operations and tunnel construction.
• Shortest and straightest route between stations, which speeds travel time for higher ridership, and reduces construction and operating costs, and wheel-wear and noise.

Most tunnels are located at depths of 50-70 feet underground. In some rare cases, tunnel depths are shallower. However, below hills and mountains, depths can be significantly deeper.

Metro trains currently operate in tunnels below single-family and multi-family residences, commercial and retail establishments, parks, schools, performance venues and religious institutions. We do not receive noise or vibration complaints from those above the tunnels. Our tunnels are also adjacent to hospitals and commercial recording studios, both with highly sensitive equipment, that have been able to continue operating. Property owners have also been able to construct projects above our tunnels and stations.

Tunnel Safety

Safety is Metro’s top priority. Along with evaluating whether a tunnel is appropriate for a project, many factors are considered to ensure a tunnel will be safe for adjacent
buildings and their occupants located above and near the project. Numerous tests are conducted to analyze ground conditions to select the best design for the tunnels, identify the most appropriate tunneling method(s) and engineer the machinery that will be used. During tunneling, the excavated ground is supported and the ground above, around and in front of the tunneling activity and machinery is monitored continuously to ensure that safety is maintained. Tunnels and underground stations incorporate other safety measures, including ventilation, air monitoring and emergency access.

Underground construction processes continue to improve, as evidenced by recent transportation tunnel and underground sewer projects, as well as new construction of buildings with deep basements and underground parking structures in Southern California and worldwide. Metro continually seeks to take advantage of new developments in tunnel engineering and technology. In some cases, our projects have also set new standards for the industry.

All Metro tunnels are evaluated, planned and designed with input from industry leading experts, including an independent Tunnel Advisory Panel comprising globally recognized geotechnical, earthquake and engineering tunneling experts.

Tunnel Construction Methods

There are three primary methods for building tunnels. The methods used will depend on a variety of factors, including the depth and length of the tunnel or tunnel segment, soil conditions, the built environment, construction cost and others. In many cases, a project will utilize more than one of these methods. The tunnel construction methods, including potential impacts and any needed mitigations, are evaluated as a part of the environmental planning for a new project. See our Environmental Review Fact Sheet at metro.net/resources.

Tunnel Boring Machine

A Tunnel Boring Machine (TBM) is like a giant drill. The TBM slowly drills through the earth, digging tunnels needed
for an underground project. As the TBM moves forward, it excavates the full diameter or cross section of the tunnel.
Once the TBM is below ground doing its work, it is unlikely that people on the surface will see, hear or feel its operation. Metro continually monitors the progress of the TBM underground, and the ground above and around it to ensure it’s operating safely at all times.

All of Metro’s operating rail lines with tunnels, as well as projects currently under construction involving TBMs, incorporate twin-bore tunnels. Twin-bore means that two companion tunnels are created, one for each set of tracks. Tunnels created using this methodology are generally about 20 feet in diameter. Analysis of future tunnel projects in LA County may determine that a larger, single-bore tunnel is appropriate. With single-bore, one machine creates a tunnel generally 40–50 feet in diameter that can accommodate both sets of tracks. There are other single-bore tunnel projects around the United States and the world. These projects are generally deeper than those built with twin-bore TBMs.

Regardless of whether it’s a single-bore or twin-bore tunnel, Metro uses the latest TBM technology to maintain pressure in the ground surrounding the tunnel and protect workers inside the TBM. As the TBM advances, concrete tunnel liners are immediately installed supporting the newly drilled portions of the tunnel. Beginning with construction of the Metro Gold Line Eastside Extension in 2004, Metro has used this construction method successfully for tunneling projects in a variety of soil conditions. Each TBM is engineered for the specific ground conditions where it will be operating.

Several acres of property are needed to launch the TBM at the start of the tunnel. That location is often used to remove excavated dirt from the tunnels. A smaller property is typically needed to remove the TBM at the endpoint. Between these starting and ending points, TBMs are generally sufficiently deep to avoid any impact above ground, including to underground utilities.

Exact locations for launching and extracting the TBM, as well as how much space will be needed to do so is, determined as part of the environmental process.

Cut-and-Cover